On-site Testing
We are able to offer a number of on-site services, enabling our engineers to perform the same high standard of testing at our customer's premises.
The services we offer include: EMC of fixed installation, where we can conduct the required tests at your site or at the location where the product is installed.
Installed Cables, we can undertake onsite measurements of installed coaxial cables to verify compliance.
Site Surveys, of RF Emissions can be made over the frequency range 9 kHz - 40 GHz.
EMF/RF Exposure, were we can offer assessments and surveys to measurement of non-ionising radiation allowing compliance to ICNIRP exposure guidelines.
On-site Testing Capabilities
Radiated Emissions 30MHz-18GHz
|
Electrostatic Discharge (ESD)
|
Voltage Dips & Interruptions
|
Conducted Emissions 9kHz-100MHz
|
Surges
|
Harmonics
|
Conducted Immunity 150kHz-400MHz
|
Fast Transients (EFT/B)
|
|
*Please contact us if you have slightly different requirements from the above.
On-site Testing Information
The extent of tests may be limited due to location:
• Radiated Immunity will be limited to spot frequencies using hand-held radio's close to the E.U.T, due to non interference limitations. • Conducted Immunity can be extended to cover some of the missing Radiated Immunity.
For purposes of onsite tests:
• Conducted Emissions will require a non-RCD circuit, or isolation transformer. • Out-of-hours access and supervision is required.
|