Country Approvals
To gain access and place your electronic products on the worldwide market, allowing your company to grow they will need to comply with all the relevant regulations.
RN Electronics can provide the required testing, assessment and certification services for the UK, Europe, North America, Canada, Japan, Australia and New Zealand - and assist with specific approval requirements for radio and EMC with different national bodies, local representation and in-country testing.
Through our knowledge and associations we have obtained successful certifications for products in the following countries.
Click on a flag and ensure your products comply with the worldwide requirements:
Europe
United Kingdom
Regulator: The Office of Communications (Ofcom)
Note: UKCA mark will replace the CE mark in the UK from 1 January 2021.
EMC & Radio Testing Requirement: European Standards are met.
EMC & Radio Certification Documentation: UK Declaration of Conformity (DoC) is required. There will be a transition period until December 2021 during which the CE mark will be accepted in the UK where the products meet EU standards.
From 1 January 2021 the UK Conformity Assessed (UKCA) marking comes in to force in Great Britain (the CE mark will continue to be used in Northern Ireland). Goods can carry both CE and UKCA marking if they are compliant with UK and EU regulations.
RN Electronics can undertake testing to the UK version of European EMC and Radio standards (BS EN). We can support you to ensure that your products are compliant for sale on the UK market whether they have been manufactured in the UK or imported.
European Union
Regulator: National regulatory body within each member state.
EMC & Radio Testing Requirement: European Standards are met.
EMC & Radio Certification Route: CE Declaration of Conformity (DoC) is required.
RN Electronics can undertake testing to all European Standards, BS EN, ETSI, CENELEC etc. As part of our service we will be pleased to advise on the standards applicable to your product.
The requirements apply to all 27 countries in the European Union:
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.
North America
USA
Regulator: Federal Communications Commission (FCC).
EMC & Radio Testing Requirement: FCC test reports can be used.
EMC Certification Route: From November 2018 only SDoC (Suppliers Declaration of Conformity) or Certification is required.
RN Electronics is also recognised as a Conformity Assessment Body (CAB) by the Federal Communications Commission (FCC). We are designated to perform compliance testing on equipment subject to Suppliers Declaration of Conformity (SDoC) under Parts 15B and 18 of the Commission's Rules.
Radio Certification Route: FCC certification is required.
As an FCC accredited testing laboratory for the US market, RN Electronics can perform unlicensed radio testing to various parts of 15C, along with testing to certain licensed rule parts. We can also provide certification services in order to achieve FCC grants and listing on the FCC’s website for Radio equipment. RN Electronics FCC scope of accreditation can be found here.
More information on FCC authorisation procedures can be found here FCC Equipment Authorisation Types.
Useful Links:
FCC Certification Process Link
Knowledge Database (Allowing you to lookup KDB’s) Link
SDOC KDB Link
Labelling KDB Link
Canada
Regulator: Interference Causing Equipment Standard (ICES) / Innovation, Science and Economic Development (ISED)
EMC Testing Requirement: Test reports relevant to ISED Standards (or equivalent) are accepted.
Radio Testing Requirement: Test reports to Radio Standards Specifications (RSS) are accepted. BETS standards are also required for certain types of radio equipment.
We can perform EMC and Radio tests to Canadian ISED standards. Our 3 & 10m OATS test site and semi – anechoic chambers are filed with ISED under 5612-1 5612-2, 5612-3, and 5612-4.
EMC Certification Route: A Declaration of Conformity (DoC) will be required.
Radio Certification Route: ISED Certification is required - RN Electronics can offer certification services in order to achieve ISED acceptance certificates for radio equipment and listing on Canada’s Radio Equipment List (REL).
Useful Links:
IC / ISED Cert process FAQ's Link
RSS-GEN Link
RSP-100 Link
Australasia
Australia and New Zealand
We can assist you in gaining access for your products to the Australian and New Zealand markets as an appointed Conformity Assessment Body (CAB) and with accredited testing.
Regulators: Australian Communications and Media Authority (ACMA) (Australia) and Radio Spectrum Management Group (RSM) (New Zealand)
EMC Testing Requirement: As a Conformity Assessment Body (CAB) under the MRA, this means that products tested in our UKAS accredited laboratory and accompanying RN Electronics test reports can be used to place your products on the market in Australia and New Zealand.
Radio Testing Requirement: Radio and wireless devices tested in our UKAS accredited laboratory to the applicable European and FCC radio standards and accompanying RN Electronics test reports can be used to place your products on the market in Australia and New Zealand. The RCM mark must be affixed to the product.
The A-tick/C-tick mark has now been phased out as of March 2016.
For further details please contact RN Electronics.
Further Information:
https://www.acma.gov.au/class-licences
https://gazette.govt.nz/home/NoticeSearch?act=Radiocommunications+Act&soloRedirect=false
RN Electronics can also offer help and guidance with certification for other countries through our partners, such as China, Japan, Singapore, Hong Kong and India. Please contact RN Electronics for further details.
Asia
China
Regulator: State Radio Regulation of China (SRRC) Type Approval
EMC & Radio Testing Requirement: In country testing.
Certification Route: Testing and certifications are required to be carried out in country.
Japan
Regulator: The Voluntary Control Council for Interference by Information Technology Equipment (VCCI) / Ministry of Internal Affairs and Communications (MiC)
Testing Requirements: We can provide access to Japanese markets through the Voluntary Control Council for Interference (VCCI) approved EMC testing.
Our large test chamber is now compliant by the VCCI and we are able to provide testing of products for the Japanese market, we can perform the following tests AC Conducted Emissions, Telecoms Emissions and Radiated Emissions 30MHz - 6GHz.
Accreditation by UKAS for the emissions testing of ITE (Information Technology Equipment) allows RN Electronics to be a Supporting Member of VCCI.
Our test reports are acceptable to the VCCI and this enables manufacturers to confidently place their ITE products on the Japanese market.
Radio and wireless devices placed in the Japanese market will require a test report showing compliance to the Japanese radio legislations.
Radio Certification Route: MiC Conformity Assessment Body (CAB) review.
Singapore
Regulator: Infocomm Development Authority (iDA).
Radio Testing Requirement: ILAC accredited FCC or EU test reports can be used.
Certification Route: Local representative required for certification.
Hong Kong
Regulator: Office of the Telecommunications Authority (OFTA)
EMC & Radio Testing Requirement: Reliant on the type of device.
EMC Certification Route: In country testing is required.
Radio Certification Route: FCC or EU test reports used in submission.
South Korea

Regulator: Korea Communications Commission Republic of Korea (KCC)
EMC Testing Requirement: Test report from NRRA-accredited laboratories accepted.
Radio Testing Requirement: In country testing is required.
India
Regulator: Wireless Planning and Coordination Wing (WPC)
Radio Testing Requirement: UKAS test reports accepted.
Radio Certification Route: EU test reports can be used, deviations apply.