+44 (0)1277 352219 | Send a Quote Request



At RN Electronics we value our customers opinions. If you have used our test services, we would very much like to have your feedback about your experience, as part of our commitment to continuous improvement. See below what our customers are saying.


Electronics manufacturer

“Thanks for your email and the efforts of your team in helping us to get this testing completed before Christmas.”

Technology company

“Thanks Gill – we appreciate you being able to accommodate this request so quickly.”

Design and technology company

“Thanks again to you and all the team for helping us through this tricky process!”

Manufacturer of hearing loop systems

“Thank you for your help with testing and approvals for this product.”

Manufacturer of dash cams

“Nick communicated brilliantly.”

Product Design and Development Consultancies

“You’ll definitely hear from us next time we have an EMC testing requirement as you’re one of our favourite test houses (especially for 300 328 stuff), despite the distance!”

Innovative metrology product company

“Thank you again for your, and your colleagues, help and support in this matter. I certainly know who to continue to recommend in the future for EMC requirements 😊.”

Technology company

“We appreciate you being able to accommodate this request so quickly.”

Assistive technology company

“Thank you for your help with testing and approvals for this product.”


Designs technology to build, test and analyse telecoms networks

“It was a very enjoyable and informative day’s testing with Lee.”

Cable manufacture

“The team at RN Electronics are very easy to work with.”

Supplier of construction and compaction equipment

“Had the pleasure of being here for 2 days, staff are very knowledgeable, friendly, and best of all with the UK current situation...... the facility is very clean.”

Manufacture of responsive human interface devices

“RN is valued by us, not the cheapest but always the first call. The pre-test, testing and after test service is always excellent and worth the additional cost.”

Manufacture of electric fly control units

“It has been an absolute pleasure dealing with RN Electronics. I look forward to dealing with them for future projects, Thanks.”

Design and manufacture of passenger information systems company

“We have always tried to provide the right information for approvals and it’s good to hear that it helps you. On our side it really helps to have a Technical Service who work with us and help us through the process.”


Medical device design and development consultancy

 “Gill and the team at RN Electronics, we appreciate the support, care and attention you have given to us during this life-saving project. You are phenomenal! Thank you from all of us for helping to make this project a success.” 

“I would like to personally express my gratitude for your efforts working with us and other members of this ventilator
project, and your patience and professionalism during the protracted process of bringing this to a close. Your engagement and commitment to the cause has been exceptional, and I have been extremely impressed with your contribution, so once again, a sincere thank you."

“Thanks for your work, and excellent support for us in precompliance testing our product last week.”

Biotechnology company

“Thanks to everyone who pulled out all the stops to get the testing/reports done as a priority.”

Manufacturer of intelligent management systems for keys and equipment

“Thank you to all of the RN Electronics team for continuing to run these EMC tests in this difficult time. Also for your support while we investigated issues back at base and the team at RN applied the fixes without us being present. I am pleased we now have all of these units tested.”

Design professional audio equipment

“Thank you for the team's hard work on this especially through these crazy times!” 

Entertainment technology company

“Thank you for going to all this effort and sorry again for causing all this trouble! Please do thank Steve too, and anyone else I got involved in this scheduling.” 

Wireless technology company

“It has been a good experience working with Dan and Ian.”

Manufacturer of dash cams

“Thanks for the document and the efficiency with which this whole process has gone, looking forward to being back with you soon.”

Consulting organisation

“I just wanted to drop a quick note to say thank you for the whole team’s effort. We are really impressed with how comprehensive and professional the work was and look forward to working with you in the future.” 


Manufacturer of electric glass melting and conditioning

“I would like to thank Steve and especially Jack, your test engineer, for their help during the three days I was at your facility.”

Testing and certification company

“Thanks for completing this Project in high priority and providing the Report in a really short lead time.” 

Manufacturer of heating equipment

“A fabulous service by you and your team, please pass my thanks on to all involved.”

Consulting organisation

"Highly satisfied with the service provided, would request RN as test house in the future." 

Pet health monitoring company

"Yesterday went well for us, please pass on my thanks to Ian and Ben." 

Design and manufacturer of security scanners

“Thank you and everyone at RN electronics for your help.” 

Manufacturer of hearing protection and hearing aids

“Very impressed with our first business dealing with RN Electronics.” 

Innovative technology and product design company

“Testing went very well and Jack was extremely helpful." 

Consulting organisation

“Highly satisfied with the service provided, would request RN as test house in the future.” 

Product design engineering and prototypes company

“Thank you for your support and I hope to be able to bring more projects to you in the future.” 

Smart energy solutions company

“RN did these tests very efficiently.”

Intelligent collision avoidance systems company

“All staff were excellent and very helpful.”

Manufacturer of Wi-Fi products

“Please thank Clint and Gus for they great support during the testing last week.”

Manufacturer of real-time flow measurement

 “Very flexible and helpful staff. Highly recommended.”

"Thank you once again for your perseverance and patience with the testing. I really appreciated your assistance and involvement with this and I was very pleased with the results we obtained." - Supplier of gaskets, 2018

"Excellent service from Jack and the staff." - Consulting organisation, 2018

"Lee and Brad were both most helpful over the last few days." - Supplier of power distribution equipment and lighting systems, 2018

"It’s really good news. Thank you very much for your help. Really appreciate." - Supplier of laboratory equipment, 2018

"Our thanks for making this a painless operation, especially with the assistance provided during the earlier testing to quickly identify the likely source of the unit’s initial failings." - Controls, sensing, monitoring and communication manufacture, 2018

"Thank you for efficient and cost effective operation!" - Design and manufacturing of HiFi electronics, 2018

“Excellent service as usual. That says it all!” - Smart sensor manufacturer, 2018

“Have always been very helpful which ever department I have spoken to” – Connected vehicle innovator, 2017

“Many thanks for your pro-active help with modifying / mending the units over the course of the recent testing sessions. This collaborative approach has worked really well for us; and I think represents a really excellent service from RN. Look forward to working with you again in the future!” – Consulting organisation, 2017

“I would also like to extend thanks to all of the team that has carried out all the work in a helpful, efficient and friendly manner and look forward to working with you all in the future” – Signal switching manufacturer, 2017

“We are very pleased with the service you provided on this project and I will have no hesitation in using your services or recommending your services to clients on future projects” – Technology development organisation, 2017

"I have been coming to RN for some years now and have found that the improvements we make during the process of getting EMC compliance makes our products more robust in the field. They are more reliable which means less recalls and less technical support is needed"

"It was good today, thanks for your help to everyone"
"I'm delighted with the immediate speed and quality of the service provided"
"Thanks for all your help yesterday (and the rest of the team)"
"Please convey my gratitude to all the team at RN Electronics for their support, flexibility and hard work over the last few weeks"

 "To the Team at RN Electronics, Just a quick note to say thanks from my colleague and myself, for your support and in particular your time spent during our visit to RN Electronics in May"
"Overall, very good and Brad (plus colleagues) worked hard to solve our problems"

"Thank you so much for the hire. The use of the equipment has been of great assistance to us" 

"Thanks for all your help and the hire of the amplifier"

"Always a pleasure working with RN.  Everyone helpful & knowledgable"

"Please thank everyone for their help and support last week"

"Can you extend my thank you to all involved during our product testing marathon.  Everyone showed a thorough technical understanding of our needs and used all of their extensive knowledge to support and provide possible solutions to our specific requirements. I have no hesitation in using and recommending your services for any future projects"

"Firstly I would like to thank you and your staff for the professionalism during the recent testing that was conducted on our behalf. You went out of your way to accommodate us and provide expert insight during the testing process. I would most certainly recommend your testing facility to all who enquire"

"Many thanks for all the work you have done for us on this device"

"Thanks a lot for this and for your time yesterday – this was extremely helpful and we also thank you (and Steve) for your hospitality and general advice"

"It all seemed fairly painless to me and I got what I wanted out of it. I suppose it would be useful to have some "mains filters on a lead" to allow a simple "would it help" test to be done. I don't know how many of your clients are looking to investigate failures as opposed to just add something that makes it work :-) For me knowing the route cause and designing it out is the preferred solution so I like to be able to tinker"

"I look forward to working with RN Electronics again soon"

"Thanks for your work and high quality of these reports"

"Once again thanks for all your help over the past couple of months"

Make Contact Image

Make Contact

Talk to our technical team to find out how we can support your project needs

Find Out More

ILAC MRA UKAS2 CE mark3 UKCA mark4 FCClogo5 ISED logo6 CW logo7 UK5G logo  8 CAI logo9 RCM mark11 VCCI Logo10 EMCTLA logo

*Extent of the accreditation is limited by the scope click to view.

RN Electronics Logo White
Kiwa Logo

Contact / Connect

LinkedIn Icon


Google Translate


This example displays a vertical translate button.

RN Electronics - Electromagnetic Compatibility Testing, UK Test Lab - EMC testing for all European and worldwide test standards.

Registered Address: RN Electronics Ltd, Kiwa House, Malvern View Business Park, Stella Way, Bishops Cleeve, Cheltenham, GL52 7DQ.

Tel: +44 (0)1277 352219, Email:  | UK Registered No: 3051259, VAT Number: GB 475 2328 39

©2019-2023 RN Electronics Ltd | Site by DVisions| Design by Luna Branding